VRP Series Vertical Single FRP High Flow Filter Housing
VRP Series Vertical Single FRP High Flow Filter Housing
VRP Series Vertical Single FRP High Flow Filter Housing has the characteristics of strong corrosion resistance, high-temperature resistance, high strength and non-conductivity. It adopts a single filter element design and is matched with a high flow series filter element. It can be configured as an independent unit according to the on-site environment or combined with a reverse osmosis system to effectively save space.
Request a Quote for
VRP Series Vertical Single FRP High Flow Filter Housing
Send us the details and we will get back to you.
VRP Series Vertical Single FRP High Flow Filter Housing has the characteristics of strong corrosion resistance, high-temperature resistance, high strength and non-conductivity. It adopts a single filter element design and is matched with a high flow series filter element. It can be configured as an independent unit according to the on-site environment or combined with a reverse osmosis system to effectively save space.
The appearance of high flow FRP filter housing is smooth and clean on the inner surface to prevent the growth of bacteria, easy to clean and cost-effective. FRP high flow filter housing is widely used in industrial RO prefiltration systems, UF pretreatment, food and beverage, power plant water treatment, fine chemical water treatment, seawater desalination systems, etc.
• Easy installation and low maintenance cost, cost-effective and saving labour
• FRP high flow filter housing has a larger water capacity and smaller installation space
• FRP high flow filter housings can be combined to meet the needs of larger flux
• Strong corrosion resistance, high-temperature resistance, high strength and non-conductive
• FRP filter housing is suitable for water filtration systems where stainless steel filter housing cannot be used
• FRP cartridge housing accepts different types and quantities of cartridge filters, easy to install and has a low maintenance cost
Contact us to request a quote today.
| Housing Material | FRP (Fibre Reinforced Polymer/Plastic) |
| Housing Direction | Vertical |
| Cartridge Length | 20″, 40″, 60″ |
| Number of Cartridges | 1 Piece |
| Installed Filter Type | OD 6″ High Flow Filter Cartridge |
| Filtration Rating | 1μm – 100μm |
| Connection | Side Port |
| Inlet/Outlet | DN80 |
| Sealing Type | Swing Bolt Hinged |
| Seal Material | EPDM, Buna-N, Viton, Silicon |
Operation Data for Vertical Single FRP High Flow Filter Housing
| Max. Temperature | 80°C |
| Max. Pressure | 150 PSI |
| Connection | Side in and side out |
| Flow Rate | 20″ length: 15m³/h |
| 40″ length: 30m³/h | |
| 60″ length: 45m³/h |
RO prefiltration systems, UF pretreatment, food and beverage, power plant water treatment, fine chemical water treatment, seawater desalination systems, etc.
Can't find what you're looking for?
Get in touch with us and we can help you find a solution.