Cartridge Filter element for high flow applications.
Aqualine is a liquid filtration solution which provides superior flow rates and guarantees long-lasting performance. Combining a small footprint with large productivity, the Aqualine plays an important role in cost optimization of water treatment across a range of industries.
Request a Quote for
Send us the details and we will get back to you.
Compared to conventional cartridge filters, AquaLine saves money by lowering capital cost and operating costs. When comparing filters with the same efficiencies or Beta ratings, nothing outperforms the cost/performance value achieved with AquaLine. Whether it is for process water, waste water, food & beverage, pharmaceutical, or other fluids for pre-filtration, guard filtration or final filtration, AquaLine is the right choice. The AquaLine system utilises proven CodeLine corrosion resistant FRP pressure vessels which provide considerable reduction in capital expenditure over metallic offerings. The housings make use of a quick opening closure that does not require tools allowing access to the element in seconds. Additionally, each housing accepts a single element providing both efficient and convenient change-outs.
This innovative element design allows for the elimination of the many additional components (caps, springs, guide posts, etc) required to seal and secure conventional filters in housings. The simplified design affords significantly easier element change-outs while assuring effective sealing and high efficiency particle removal. The elements provide an integral molded handle further easing access and removal. AquaLine filters are available with a broad range of media types and micron ratings to match requirements of the application. For temperatures above 130°F (54.4°C) up to 180°F (82.2°C) please contact Pentair.
- High flow filtration with a wide range of cartridge micron rating to suit your application
- High-performance pleated media filtration technology
- Long lasting rugged FRP housings from Codeline, available in 150 & 300 psi pressure rating
- ASME complaint FRP housings for critical applications
- Labor-saving quick module change
- Can be installed both vertically and horizontally
Please contact us for Ordering Information.
|ELEMENT TYPE||AQUALINE Fluid Process element|
|SEPARATION MEDIA||Proprietary PolyForm media formulation comprised of 100% polypropylene micro-fibers cross-linked into a Locked
Pore Structure specifically designed to separate particulate from high flow liquid streams
|MEDIA EFFICIENCY||10 micron (Nominal)|
|CONFIGURATION||Single Open End; Outside-in Flowing|
|DIMENSIONS||Nominal Length: 60” (152.4cm)
Nominal O. D.: 6.75” (17.15cm)
|RATINGS||Recommended change out 25-30 PSID (based on process limits)
Maximum Operating Temperature is 130°F. (54.4°C)
Unlike conventional housings, AquaLine Systems are modular to offer configurations for flow rates ranging from 50 gpm to 10,000 gpm. AquaLine systems can also be connected to pump, multi-media bed, adsorption, neutralization and membrane modules to provide you with multiple process solutions.
Aqualine’s corrosion resistance and high flow rates have brought this filtration concept to a wide range of industries, including electronics, oil & gas, chemicals, pharmaceutical, food & beverage, desalination etc. Aqualine is widely used for particulate filtration in the pretreatment for RO systems.
AquaLine housings are 8” diameter FRP housings with a rugged construction that secure long-lasting performance. They deliver superior flow rates and are a cost-effective alternative to steel equivalents.
High capacity Aqualine pleated cartridges are 6.5” in diameter & 60” long and made of superior polypropylene media. The pleated construction with an outside in flow provides maximum flow rates with the lowest possible pressure drop. Minor filter change-outs saves cartridge cost and labor.
Aqualine saves time and money in several ways. In vertical use it saves valuable floor space. The housings feature the Codeline quick-change design allowing operators to access and change cartridges in a matter of minutes without disassembly. The time to change an Aqualine cartridge with a flow rate of 150 gpm is typically 5 minutes, versus 30 minutes for standard multi-round housings with the same flow rates. A single element can be changed while the system stays online, eliminating the additional cost associated with downtime.
The AquaLine system utilises proven CodeLine corrosion resistant FRP pressure vessels which provide considerable reduction in capital expenditure over metallic offerings.
- Environmental Protection
- Chemical Industry
- Power Plant
Can't find what you're looking for?
Get in touch with us and we can help you find a solution.