DCF 400/ 800/1600
DCF 400/ 800/1600
DCF 400/ 800/ 1600 are considered the most efficient mechanically cleaned filter on the market, the Eaton DCF-Series is ideal for highly viscous, abrasive, or sticky liquids. The DCFs operate at a consistently low differential pressure and deliver simple, reliable operations in which a low initial investment is a key driving factor.
Request a Quote for
DCF 400/ 800/1600
Send us the details and we will get back to you.
- Elimination or reduction in disposable filter bags and cartridges for reduced operator handling inventory costs and landfill waste
- Reduction in product loss, more thorough contaminant purge in a highly concentrated waste stream
- Virtually maintenance-free, near 100% uptime
- Compact design, the lower capital cost to fit most installations
- Stainless steel screens from 15-micron slots to 1/4″ perforations to handle a wide range of filtration needs
- Available with UHMWPE, Urethane-, Teflon, or Kynar-Cleaning Discs
- Reduction or elimination of operator intervention for safer operation
Contact us to request a quote today.
| DCF 400 | DCF 800 | DCF 1600 | |
| Single Unit Weight | 35 lbs (16 kg) | 75 lbs (34 kg) | 215 lbs (97.5 kg) |
| Service Height | 61.25 in (1,556 mm) | 69.25 in (1,760 mm) | 102 in (2,591 mm) |
| Total Volumetric Capacity | 0.94 gal (3.5 liters) | 3.9 gal (14.8 liters) | 11 gal (41.6 liters) |
| Purge Chamber Capacity | 4 fl. oz (119 ml) | 25 fl. oz (0.74 liters) | 1.5 gal (6 liters) |
| Filtration Surface Area | 112 in², 722 cm² | 264 in², 1,703 cm² | 610 in², 3,935 cm² |
| Flow Rate Range at 100μm | 2–20 gpm, 0.45–4.5 m³/hr | 20–60 gpm, 4.5–13.6 m³/hr | 60–200 gpm, 13.6–45.4 m³/hr |
| Temperature, maximum | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) |
| Pressure, maximum | 300 psi (21 bar) | 150 psi (10.5 bar) standard | 150 psi (10.5 bar) standard |
| Service Requirements Air for Actuator Drive, min |
400/800 = 60 psi at 5 cfm (4 bar @ 8.5 m³/min) 1600 = 80 psi at 5 cfm (5 bar @ 8.5 m³/min) | ||
| Electrical for Controllers | Control for all three models, automated only, 110/220V, 50/60 Hz, single phase | ||
Contact us for more information.
- Paper coatings
- Ppcc/gcc slurries
- Phenolic resins
- Detergents
- Petroleum-based greases
- Ethanol processing
- Hot fry oils
- Cip fluids (sodium hydroxide)
- Starch
- Lime slurries
- Adhesives
- Curtain coaters
- Nutriceuticals
- Machining coolants
- Paint
- Ink
- Chocolate
- Edible oils
- Tallow
Can't find what you're looking for?
Get in touch with us and we can help you find a solution.