HAYFLOW
HAYFLOW
Combines the benefits of a filter bag with those of a filter cartridge into a new, rugged filter element with optimum filtration performance. The filter area of HAYFLOW filter elements is up to 65% larger compared to a standard filter bag. Extended service life and long intervals between filter change-outs lead to reduced operating costs.
Up to 65% more filter area in a compact, easy-to-use filter element
Request a Quote for
HAYFLOW
Send us the details and we will get back to you.
- Higher flow rates reduce the size of bag filter housings by up to 50% and lower the initial costs of the filtration system
- Extended service life is up to five times longer compared to standard filter bags
- Up to 35 times more effective than standard filter cartridges.
- Long intervals between filter element change-outs reduce operating costs
- Contains only 25% of residual liquid compared to filter bags of similar size
- Patented SENTINEL seal ring prevents liquid bypass for safe filtration
- Low differential pressure results in less energy consumption of pumps
- Simple to insert into existing bag filter housings with new HAYFLOW restrainer basket
- Easy element change-out
- Material is free from silicone and crater-forming substances
- Eaton strongly recommends the use of an insertion tool that facilitates the insertion of the filter element into the bag filter housing and ensures the correct alignment of the filter element inside the HAYFLOW restrainer basket
Contact us to request a quote today.
| Materials | POXL, PEXL: Extended-life needle felt polypropylene or polyester LCR-128: Melt-blown polypropylene |
|
| Seal rings | Welded polypropylene or polyester SENTINEL seal ring and bottom ring | |
| Retention ratings | POXL, PEXL: 1, 5, 10, 25, 50, 100 µm LCR-128: 37 µm @ >95% efficiency2 POXL, PEXL: nominal efficiency |
|
| Size | 02: Ø 7 x 28” L (180 x 700 mm) | |
| Filter area | 02: 7.5 ft² (0.7 m²) | |
| Max. operating temperatures | Polypropylene: 194 °F (90 °C) Polyester: 302 °F (150 °C) |
|
| Max. differential pressure | 36.2 psi (2.5 bar) | |
| Recommended change-out pressure for disposal3 | 11.6 – 21.7 psi (0.8 – 1.5 bar) | |
| Max. flow rates4 | POXL, PEXL: 02: 176 GPM (40 m³/h) LCR-128: 02: 110 GPM (25 m³/h) |
Contact us for more information.
- Paints
- Lacquers
- Inks
- Dispersing agents
- Resins
- Water purifying systems
- Solvents
- Lubricants and liquids used in metal processing
- Liquids used in metal processing
- Detergents containing solvents
- Water in metal washing installations
- Drinking water
- Beer
- Wine
- Edible oil
Can't find what you're looking for?
Get in touch with us and we can help you find a solution.