LiquiPleat™ P Series (JPMP)
Polypropylene Synthetic Filter Elements
LiquiPleat P Series polypropylene filters are pleated liquid filtration elements designed for applications with large flow and contaminant requirements.
LiquiPleat P synthetic filters are available in various grades and configurations of high performance polypropylene with hardware to suite your applications.
Request a Quote for
LiquiPleat™ P Series (JPMP)
Send us the details and we will get back to you.
High Temperature (HT) Filter Cartridges are the ideal solution for refineries to filter contaminants in a wide range of micron ratings and elevated temperatures.
The refining industry is moving towards finer filtration to:
- Protect equipment,
- Reduce costly maintenance, such as the replacement of catalysts, and
- Help achieve new environmental regulations and
- Mitigate maintenance issues by removing issues caused by solid and semi-solid contaminants.
Contact us to request a quote today.
Criteria | LiquidPleat™ |
Application | Feed for CDU, Hydrocracking, Hydrotreating, Catalyst Protection, CAT Cracker, CAT Reforming, Vis Breaking, Delayed Coking, High Temperature Solvents, and other refinery systems |
Operating Temperatures | 500 ºF |
Nominal OD | 2.5” to over 6” |
Nominal Lengths | Up to 60” continuous length cartridge |
Hardware | End Caps: Carbon Steel or Stainless Steel Core and Outerwrap: Carbon Steel or Stainless Steel Standard: Viton Options: Teflon and Klinger |
Standard Media Options | Microfiberglass |
Typical End Cap Configurations | JHF, 3862, 6055/4055, JXC (pleated bag) |
Flow Direction | Outside to In or Inside to Out |
Micron rating | 0.5 to 100 *Other micron ratings are available upon request |
- The HT cartridges maintain filtration efficiency while eliminating complex cleaning processes that may require the use of harsh chemicals to clean.
- Rated for operating temperature of 500 °F (260 °C) this cartridge provides refineries with an effective and efficient alternative to older technologies, such as string-wound cartridges which may not be suitable at lower micron ratings.
- Available in a wide range of cartridge sizes from small diameter (2.5” OD) to large diameter (6+” OD) for new applications and vessels or to retrofit in existing vessels.
- Used as pre-filters to backwashable filters systems, these cartridges may extend run times between cleaning-cycles leading to reduced downtime and maintenance costs.
LiquiPleat P synthetic filters are available in various grades and configurations of high performance polypropylene with hardware to suite your applications.
Can't find what you're looking for?
Get in touch with us and we can help you find a solution.